Portable Fire Pump Diesel Pump technology upgrade

Diesel engine water pump technology upgrade so that the development of enterprises go further

Diesel engine water pump installation, gear drive type pump gear should be closely combined with the transmission gear, belt drive type water pump should ensure the pump shaft and pulley coaxiality within the prescribed range, to prevent the engine due to increase in speed or load resulting in water pump shaking, aggravate wear. Portable fire pump

Adjust the tightness of the diesel pump belt correctly. Do not adjust the fan belt too tightly, otherwise it will increase the load on the pump bearing. If it is more than two belt drive, to ensure that several belt old and new, length, tightness is consistent, to prevent uneven tension of each belt, so that the pump force imbalance and premature damage.

Fill lubricating oil in time. Fill the diesel pump bearing with oil in a timely manner according to the instructions in the Portable Fire Pump. Do not fill too much or too little oil to prevent premature bearing damage.

Do not plug the overflow hole. Some diesel engine pump shaft overflow hole, through the overflow hole can be observed whether the water pump is leaking. If the overflow hole is blocked, the water leakage from the pump will enter the bearing and affect lubrication, causing premature damage to the bearing.

https://www.woqfirepump.com/products/

During disassembly and installation, no hard beating is allowed. A Portable Fire pump is used to remove key components such as pulley and pump bearings when servicing diesel pumps. It is easy to cause the diesel pump bearing bending deformation, the diesel pump shaft end thread slip or damage if it is hit hard during installation. In addition, because the impeller and pump shaft with tight, unless necessary, generally do not disassemble. Remove the scale in the pump in time. Excessive scale in a water pump weakens the water pump’s pumping capacity and corrodes all components in the water pump, causing premature damage to the water pump.

Diesel engine pump has the characteristics of good starting, strong overload capacity, compact structure, convenient maintenance, simple use, high degree of automation, is a kind of reliable performance of fire fighting equipment. Diesel engine water pump maintenance method analysis is as follows:

1. Check the oil plane of the injection pump governor: if it does not reach the specified line mark, it should add enough oil (some injection pump governor has no ruler, so this step can be omitted).

2, the correct maintenance of diesel pump, especially preventive maintenance, is easy and economic maintenance, so it is the key to prolong and reduce the cost of use. For daily maintenance, check the fuel amount in the fuel tank as follows: Observe the fuel amount in the fuel tank and fill it as required.


Post time: Aug-17-2022